About Geek Bar Atomizer

The English name of the atomizer is Atomizer£¬ which is one of the essential parts of the Geek Bar device. Therefore£¬ if you want to play with Geek Bar£¬ you need to have a thorough understanding of multiple atomizers.In combination with these conditions, GeekBarVape It can still let us see good development and bring fresh vitality to the whole market. https://www.geek-bar-vape.us/

1. Classification of atomizers:

A. Finished atomizer subohmtank

B. RBA atomizer (Rebuildatomizer)

RBA can be divided into:

¢ÙRTA (Rebuildtankatomizer)

¢ÚRDA (Rebuilddripatomizer)

¢ÛRDTA (Rebuilddriptankatomizer)

The atomizer is the most important part of Geek Bar except for the power supply equipment. The smoke is obtained by heating the heating wire in the atomizer to evaporate the smoke oil on the internal oil guide cotton. The air intake structure of the atomizer and the structure in the atomization chamber greatly affect the taste during use.

2. Working principle of atomizer:

The working principle of all atomizers is the same. The host is powered to heat the heating coil (or atomizer core) in the atomizer. The heating coil heats up£¬ evaporates the smoke oil adsorbed on the oil guide cotton outside (or inside) of the coil£¬ and then the atomized smoke is taken away by the airflow inhaled by the user. Any change in any of these points will affect the taste of the atomizer.

Atomizers are divided into two categories according to the characteristics of their atomizer cores:

¢Ù Finished atomizers£¬ because they use disposable finished heating cores that match the atomizer£¬ they are called finished atomizers (mostly oil storage atomizers). Generally£¬ there is no DIY base (some products are equipped with DIY components)£¬ and the finished heating core can be reset due to its structural problems£¬ but the effect after reset is generally difficult to reach the original effect£¬ and it takes a long time.

¢ÚRBA atomizer£¬ also known as rebuildable atomizer core atomizer. It is not equipped with a finished atomizer core£¬ and players need to wind the heating coil and install the heating coil and oil guide cotton by themselves. According to its structure£¬ it can be divided into three types: RTA£¬ RDA£¬ and RDTA.

RTA is a rebuildable oil storage atomizer£¬ RDA is a rebuildable drip oil atomizer£¬ and RDTA is a drip oil atomizer with an oil tank.

RBA structural features:

The structure of the finished atomizer is generally composed of a drip nozzle£¬ a top cover£¬ an oil tank£¬ a finished atomization core£¬ and a base.

RTA atomizers are generally composed of drip nozzles£¬ a top cover£¬ an atomization tank£¬ an oil tank£¬ and an electrode base.

RDA atomizers are generally composed of drip nozzles£¬ an atomization tank top cover£¬ an atomization tank£¬ and an electrode base.

RDTA atomizers are generally composed of drip nozzles£¬ an atomization tank top cover£¬ an atomization tank£¬ an electrode base£¬ and a bottom oil tank.

Generally speaking£¬ the airway of a mouth-feeling atomizer is long and narrow£¬ the internal space and air inlet of the atomization tank are small£¬ and there is an inverted cone gathering structure on the top of the atomization tank£¬ which can fully compress the smoke and improve the fullness and clarity of the taste. Since the air inlet of the mouth-feel type atomizer is generally small£¬ it can produce strong inhalation resistance (lung inhalation will be very difficult)£¬ so most of them adopt the mouth-inhalation method.

Then the airway of the large smoke atomizer is thicker (or there is no airway)£¬ and the space and air inlet in the atomization cabin are larger£¬ which can fully mix the smoke and air and increase the volume of the smoke. The taste is mainly rich. Since it is generally used by lung inhalation£¬ the smoke stays in the mouth for a short time£¬ and the fullness and clarity will also decrease slightly.

3. Atomizer purchase suggestions:

1. The finished atomizer is more suitable for beginners or players who do not have time (or do not want) to perform heating wire *** due to the stability of the taste and very simple operation method.

2. After so long development£¬ the RTA atomizer has begun to polarize. On the one hand£¬ there is a mouth-inhalation oil storage atomizer that tends to taste the smoke oil£¬ and on the other hand£¬ there is a large smoke lung inhalation oil storage atomizer that tends to have a certain endurance while tending to have a large smoke. The simplest way to distinguish is to determine whether it is a mouth-suction type atomizer or a large smoke lung atomizer based on the size of the atomizers air inlet.

3. RDA drip atomizers also have the same differentiation. Players can distinguish whether it is a large smoke drip atomizer or a mouth-suction type atomizer based on the size of its atomizer cabin and air inlet. Generally speaking£¬ the smaller the atomizer cabin and the smaller the air inlet£¬ the mouth-suction type drip atomizer.

4. The RDTA atomizer adds an oil storage tank to the bottom of the RDA atomizer to improve the problem of low oil storage when the RDA atomizer uses cotton to store oil.

After so many years of development£¬ atomizers have emerged in various styles due to the needs of players£¬ tending to be finished atomizers for novices£¬ tending to taste the mouth-suction type atomizer for tasting the e-liquid£¬ and tending to experience the large smoke type of lung atomizer. The endless structural innovations are all for players to get a better experience.