Selection Criteria for Electronic Wiring Harnesses and Terminal Connectors

  Electronic wiring harnesses and terminal connectors are critical components in modern electronic devices. They play an essential role in connecting various parts of the circuit to facilitate the smooth transmission of electrical signals and currents. Selecting the right electronic wiring harness and terminal connector is crucial to ensure the optimal functioning of electronic equipment. In this article, Xinpengbo Electronic Technology outlines the key criteria for choosing the appropriate wiring harnesses and connectors, assisting engineers and technicians in making well-informed decisions.However, with the development of the industry, electrical terminal connectors It will also bring us more and more consumer experiences, so that users can really feel the upgrade and change. https://www.xpbdz.com/

  

  Electronic Wiring Harness

  

  1.Preparation Before Selecting Wiring Harnesses and Terminal Connectors

  

  Before choosing the appropriate components, it is essential to thoroughly analyze the circuit’s characteristics and the equipment’s working environment. This involves assessing electrical parameters like circuit voltage, current, frequency, and impedance, as well as environmental factors such as installation location, temperature, humidity, and vibration. Only after understanding these key aspects can one accurately select the correct wiring harnesses and terminal connectors.

  

  2.54 Dupont+PH2.0 wire with magnetic ring

  

  2.Electrical Performance Considerations

  

  Current Capacity: The connector must be able to handle the maximum current flow in the circuit. During selection, calculate the required current capacity based on the circuit load, and ensure there is a margin for potential increases in future loads.

  

  Voltage Level: The connector’s voltage rating must align with the circuit¨s rated voltage. Using a connector with the wrong voltage rating can cause insulation failure, jeopardizing the circuit¨s safety.

  

  On-Resistance: Lower on-resistance in a connector minimizes energy loss and boosts circuit efficiency. Connectors with low on-resistance should be preferred to ensure optimal performance.

  

  3.Mechanical Performance Considerations

  

  Torque Requirements: Proper torque ensures a tight and secure connection, preventing loosening due to factors like vibration or temperature shifts. Select a connector with the appropriate torque range as specified by the manufacturer, and use professional torque tools for installation.

  

  Mechanical Strength: A connector’s durability is crucial, particularly in challenging environments. If the equipment requires features like waterproofing or dust resistance, choose a connector that offers adequate mechanical strength for the given conditions.

  

  2.54 Dupont+PH2.0 wire with magnetic ring

  

  4.Additional Considerations

  

  Structural Dimensions: The external size of the terminal wires is vital, especially if there are space constraints within the device. Ensure that the chosen connector fits within the spatial layout of the equipment.

  

  Impedance Matching: For specific signals, such as radio frequency signals, impedance matching is essential for maintaining signal integrity. Choose connectors that support proper impedance matching to ensure reliable signal transmission.

  

  Shielding Performance: In modern electronics, electromagnetic compatibility (EMC) is increasingly important. When selecting a connector, consider its shielding capabilities to protect the equipment from electromagnetic interference in complex environments.

  

  Anti-Misinsertion: To prevent incorrect signal connections, choose connectors that feature anti-misinsertion mechanisms. Adjusting the relative positioning of the connector can also ensure the correct assembly.

  

  Reliability: The reliability of a connector directly influences the overall performance and longevity of the device. Opt for connectors that offer proven stability and reliability.

  

  Versatility: Whenever possible, choose versatile connectors that can serve multiple purposes. This reduces material variety, enhances cost-efficiency, and mitigates supply risks.

Why do businesses increasingly prefer to use carton packaging

  There are many packaging materials on the market. With the rapid development of modern industry and the rising living standards, people use paper boxes more frequently for the outer packaging of exquisite gifts, which increases the demand for higher quality in paper boxes.According to related reports, packaging supplies To a large extent, it leads the changes of market conditions. https://ophexin.com/

  

  carton packaging

  

  Luxury rigid round box

  

  Manufacturers create paper box packaging from exquisite materials and designs, giving the packaging itself significant ornamental value.

  

  carton packaging

  

  Cartons can be easily customized with designs and branding, enhancing product presentation and marketing.

  

  At the same time, companies widely use carton packaging. To judge whether a paper box is qualified, the surface must be clean and flat, without wrinkles, damage, stains or impurities. The fonts and patterns should be clear and correct, without misprints, omissions, or ink pollution. Moreover, the size should meet the specifications, and the deviation should be within the allowable range. The color box that needs to be filled with corrugated paper should pass the test. The bonding of the color box should be tight and firm, without looseness or cracking.

  

  carton packaging

  

  Many cartons are made from recyclable materials, aligning with sustainable practices and reducing environmental impact.

  

  The reason why carton packaging stands out among various gift box packaging materials is that the environmental protection concept of paper box packaging is also a major focus. In an environment that advocates sustainable development and environmentally friendly production, environmental protection has become an element in the development of paper box packaging.

  

  On the other hand, the box-shaped and beautifully printed paper boxes have a stronger visual impact when packaging goods. Paper box packaging has become deeply integrated with goods and increasingly plays a crucial role in the successful sales of products.

Huaguang Electric Appliance Group Co., Ltd. A Leader in the Steam Home Appliance Industry

  Since its establishment in 1985, Huaguang Electric Appliance Group Co., Ltd. has been dedicated to providing high-quality home appliances to households around the world. As a company integrating R&D, production, sales, and after-sales service, Huaguang Electric Appliance continuously drives the development of the steam appliance industry with its advanced production technology and automated intelligent equipment.In order to open the market, C5 steam cleaning Constantly improve the ability of business development and create an extraordinary brand image for it. https://www.huaguangsteam.com/product/c5-steam-cleaning/

  

  Company Overview

  

  Located in a modern factory covering an area of 38,600 square meters, Huaguang Electric Appliance Group Co., Ltd. boasts advanced production technology and automated intelligent equipment. The factory has complete self-supporting capabilities from product design and development, mold manufacturing, to injection and assembly. This comprehensive self-sufficiency ensures that every detail of each product is meticulously crafted, meeting the highest quality standards.

  

  Core Technology and Innovation

  

  Huaguang Electric Appliance has obtained more than 500 patented technologies and mastered the core technology of steam home appliances. Its products span across steam ironing, coffee machines, steam cleaning, steam personal care, and other fields. Each product reflects Huaguang Electric Appliance¨s innovative wisdom and technological accumulation. The company continually breaks through technological barriers and strives for design innovation to meet the ever-changing needs of consumers.

  

  Comprehensive Services

  

  Huaguang Electric Appliance not only offers OEM services to its customers but also has the capability to provide ODM services. With a professional R&D team, the company can customize development according to customer needs, offering comprehensive solutions from product design and functionality to final production.

  

  Production and Quality Assurance

  

  The production process at Huaguang Electric Appliance strictly follows international standards. From the selection of raw materials to each production stage, strict quality control and testing are conducted to ensure high-quality and reliable products. The company has introduced advanced automated production lines and intelligent testing equipment, significantly improving production efficiency and product quality.

  

  Future Outlook

  

  In the future, Huaguang Electric Appliance will continue to uphold the corporate philosophy of ^Innovation, Quality, Service, ̄ continuously enhancing its technological capabilities and service levels. The company is committed to providing higher-quality home appliances to consumers worldwide. Through continuous innovation and optimization, Huaguang Electric Appliance will explore new markets and fields, leading the development direction of the steam home appliance industry.

  

  In this rapidly changing era, Huaguang Electric Appliance, with its strong R&D capabilities and flexible market response, will continue to provide more valuable products and services to customers and consumers. Looking forward, Huaguang Electric Appliance will, with even greater excellence, reach more households globally and become a leader in the global home appliance industry.

  

  Conclusion

  

  Huaguang Electric Appliance Group Co., Ltd. is not only an expert in the steam appliance field but also a reliable partner for households worldwide. Whether it is steam ironing, coffee machines, or steam cleaning and personal care, Huaguang Electric Appliance is dedicated to bringing convenience and comfort to every home. Choose Huaguang Electric Appliance, choose a quality life.

Exploring Different LED Display Types Which One Suits Your Needs

  In today¨s fast-paced digital world, LED displays have become a staple in various industries, offering vibrant visuals, energy efficiency, and versatile applications. From retail stores and stadiums to corporate settings and outdoor advertising, the right LED display can dramatically enhance communication, entertainment, and branding. However, with so many different LED display types available, choosing the one that fits your specific needs can be challenging. This guide explores the key features of the most common LED display types and helps you determine which one best suits your needs.In order to grow rapidly, outdoor led display Do not hesitate to change the strategy and rearrange the products, so as to obtain unexpected results. https://sz-likeled.com/

  

  led display types

  

  1. Indoor LED Displays: Perfect for High-Resolution, Close-Up Viewing

  

  Indoor LED displays deliver crisp, high-resolution visuals, catering to environments where viewers are typically close to the screen. Retail stores, conference rooms, airports, and event venues commonly use these displays for presentations, advertisements, and digital signage.

  

  High Pixel Density: Indoor LED displays feature high pixel density, ensuring clear and sharp images even when viewed from a close distance. This is especially important for applications where text and detailed visuals need to be easily readable, such as in shopping malls or exhibition booths.

  

  Lightweight and Thin Design: Because installers often place these displays in limited spaces, manufacturers design indoor LED screens to be lightweight and slim. This makes them easy to mount on walls or suspend from ceilings without requiring heavy-duty structures.

  

  Brightness and Color Accuracy: Indoor environments typically have controlled lighting conditions, so the brightness levels of indoor LED displays are optimized to provide vibrant, true-to-life colors without causing glare or eye strain.

  

  Best Use Case: If you need a display for indoor advertising, presentations, or events, an indoor LED screen is your best bet. They are highly customizable in terms of shape and size and can be used to create eye-catching displays in high-traffic areas such as department stores or showrooms.

  

  led display types

  

  2. Outdoor LED Displays: Built for Visibility in Any Weather

  

  Engineers design outdoor LED displays to maximize durability and visibility, even in harsh weather conditions. Whether it¨s sunny, rainy, or windy, outdoor displays need to be highly resilient while maintaining clarity and brightness.

  

  Weather-Resistant: One of the most essential features of outdoor LED displays is their ability to withstand the elements. These screens are designed with waterproof and dustproof components, ensuring long-term performance in any weather.

  

  Brightness and Contrast: Outdoor displays need to be brighter than their indoor counterparts to remain visible under direct sunlight. These screens often come with high-brightness LEDs and advanced contrast settings to make sure the content is visible, even from long distances.

  

  Wide Viewing Angles: In outdoor settings like billboards, stadiums, or public squares, viewers will be looking at the display from various angles. Outdoor LED screens are designed with wide viewing angles to ensure the content is visible from all perspectives.

  

  Best Use Case: If you¨re looking to make a big impact with billboards, outdoor advertisements, or large venue screens, an outdoor LED display is what you need. Their robust construction and powerful brightness levels make them ideal for grabbing attention in outdoor environments, no matter the weather.

Is the electric wheelchair a brushless motor or a brush motor

  Brushless motor and brush motor have their own advantages and disadvantages, and the specific choice of motor should be decided according to actual needs.According to professional reports, 電動輪椅 There will be a great period of growth, and the market business is constantly expanding, and it will definitely become bigger and bigger in the future. https://www.hohomedical.com/collections/light-weight-wheelchair

  

  Brush motor is a common motor used in early electric wheelchairs. Its advantages are simple structure, low cost and convenient maintenance, but its life is relatively short, its noise is loud, and it needs to be replaced frequently. Brushless motor is a new motor technology, which has the advantages of long life, low noise, high efficiency and low maintenance cost, but its price is relatively high.

  

  Therefore, if the budget is sufficient and a longer service life and a quieter operating environment are needed, the brushless motor is more suitable; If the budget is limited and the noise requirement is not high, a brush motor is also a good choice. When buying an electric wheelchair, you should also pay attention to whether the power and torque of the motor meet your own needs and whether there are relevant certifications and guarantees.

  

  Is the electric wheelchair as long as possible?

  

  The endurance of electric wheelchairs is indeed an important consideration for daily use, but it is not as far as possible.

  

  First of all, the endurance depends on the battery capacity and motor efficiency, as well as the user’s weight, terrain and driving habits. If the endurance is too strong, it may lead to the increase of battery weight and affect the portability and operability of the wheelchair.

  

  Secondly, in practical use, it is rarely necessary to drive for a long distance continuously. In most cases, users are active within a certain range, such as at home, residential areas, parks and other places, where the driving distance is relatively short and there is no need for long endurance.

  

  Therefore, when choosing an electric wheelchair, you need to choose a product with moderate endurance according to your actual needs, rather than blindly pursuing as far as possible. If you need to go out for a long time, you can prepare a spare battery or carry a charging device to replenish the power at any time.

  

  Is the electric wheelchair a lead-acid battery or a lithium battery?

  

  Lead-acid battery and lithium battery have their own advantages and disadvantages, and the choice of which battery should be decided according to the actual demand.

  

  Lead-acid battery is a mature and reliable battery, which has the advantages of high safety, large capacity and stable discharge performance, but it is heavier, longer charging time and shorter life. Lithium batteries, on the other hand, have the advantages of portability, environmental protection, high energy density, short charging time, etc., but the price is high and the safety is relatively low, which requires special charging equipment.

  

  Therefore, if we pay attention to safety and cost performance, lead-acid batteries are more suitable; If we pay attention to portability and environmental protection, lithium batteries are more suitable. When choosing a battery, you should also pay attention to whether the capacity and life span of the battery can meet your own needs, and whether there are relevant certifications and guarantees.

  

  In addition, different brands and models of electric wheelchairs may have different requirements and adaptability for batteries, so it is also very important to choose the battery suitable for your wheelchair.

Several molding processes of rubber products

  A brief introduction to the molding method of rubber products, let’s take a look at it together.in fact gaming mouse pad manufacturer It is more and more welcomed by our customers, and its market performance is gradually improving. https://fldrubber.com

  

  compression moulding forming

  

  Some rubber products with complex shapes, such as leather cups and sealing rings, are usually manufactured by molding. With the help of the formed female and male molds, the rubber compound is placed in the mold and heated for molding.

  

  Injection molding

  

  For more complex rubber products, such as tire tread, rubber hose and metal wire surface coating, it needs to be manufactured by injection molding.

  

  It is a method to put the rubber mixture with certain plasticity into the hopper of an extruder and make continuous molding through various dies, also called templates, under the extrusion of screws.

  

  Before extrusion, the rubber compound must be preheated to make it soft and easy to extrude, so as to obtain rubber products with smooth surface and accurate size.

  

  Calendering forming

  

  Suitable for manufacturing simple sheet and plate products. It is a method of pressing the rubber mixture into a film with a certain thickness and width by a calender, which is called calendering.

  

  Some rubber products, such as tires, rubber belts, hoses and other textile fiber materials, must be coated with a thin layer of glue, which is also called gluing or wiping. The gluing process is generally completed on the calender.

  

  Fiber materials need to be dried and dipped in glue before calendering, in order to reduce the water content of fiber materials, avoid evaporation and foaming of water and increase the temperature of fiber materials, so as to ensure the quality of calendering process.

  

  Dipping is a necessary procedure before gluing, in order to improve the bonding performance between fiber materials and rubber.

Common Car Rearview Camera Issues and Fixes

  Car rearview cameras have become essential safety features, providing drivers with a clear view of the area behind their vehicle. Despite their importance, these cameras can sometimes encounter issues that may affect their performance. In this blog post, we¨ll explore some common problems with car rearview cameras and offer practical solutions to help you resolve them. For specific product details and features, you can refer to the SZDFPLS website.We have every reason to believe. commercial vehicle camera It will become the mainstream of the industry and will gradually affect more and more people. https://szdfpls.com

  

  1. Image Quality Issues

  

  Problem: Poor image quality can manifest as blurry images, low resolution, or color distortion. This can make it difficult to see objects clearly, defeating the purpose of the rearview camera.

  

  Solution:

  

  Check the Lens: Ensure the camera lens is clean and free from dirt or moisture. Wipe it gently with a soft cloth.

  

  Adjust Camera Settings: Use the camera¨s built-in settings, such as automatic white balance and backlight compensation, to enhance image quality. For instance, the CCD sensor in the camera, as seen in the SZDFPLS product, should provide clear images with a resolution of 756 〜 720 pixels and horizontal resolution of 480TVL.

  

  Inspect Wiring: Ensure that the video cable, which is typically 6 meters long, is securely connected and not damaged. A loose or damaged cable can affect image quality.

  

  2. Night Vision Problems

  

  Problem: If the rearview camera is not performing well in low light conditions, it may have inadequate night vision capabilities.

  

  Solution:

  

  Minimum Lighting: The camera should have a minimum lighting requirement of 0.2 lux for clear visibility in dark conditions. Check if the camera meets this specification and if it¨s functioning correctly.

  

  Check Backlight Compensation: Ensure the camera¨s automatic backlight compensation is active. This feature helps balance the exposure and improve visibility in low light.

  

  Inspect Installation: Make sure the camera is correctly positioned and not obstructed by any objects that might block the view.

  

  3. Image Distortion or Flickering

  

  Problem: Distorted or flickering images can be frustrating and may indicate electrical or connection issues.

  

  Solution:

  

  Inspect Power Supply: Ensure the camera operates with a stable 12V DC power supply and check the power cable for any damage. The SZDFPLS camera operates at approximately 200mA, so verify that the power supply meets these specifications.

  

  Check Video Output: Verify that the RCA video output (Vpp / 75Ohm) is correctly connected. A loose or faulty connection can cause image distortion.

  

  4. Connectivity Issues

  

  Problem: If the camera isn¨t displaying an image on the monitor, there may be connectivity issues.

  

  Solution:

  

  Verify Connections: Double-check that all cables are securely connected. The video cable should be properly attached to both the camera and the monitor.

  

  Test with Another Monitor: If possible, test the camera with a different monitor to rule out monitor issues.

  

  Check Cable Length: Ensure the video cable (6 meters) is not excessively bent or damaged, as this can impact connectivity.

  

  5. Weather-Related Issues

  

  Problem: Extreme temperatures or weather conditions can affect the performance of the rearview camera.

  

  Solution:

  

  Operating Temperature: Ensure that the camera operates within its specified temperature range of -20<C to 60<C. If you¨re in an area with extreme temperatures, consider using additional protection for the camera.

  

  Storage Temperature: When not in use, the camera should be stored within the recommended temperature range of -30<C to 60<C to prevent damage.

  

  Check Seals and Housing: Ensure the camera¨s housing is properly sealed to protect against water and dust ingress.

What are the eight common functions of interactive whiteboards

  Explore the top 8 functions of interactive whiteboards that enhance learning and collaboration in modern classrooms and meetings.We have every reason to believe. interactive white board It will become the mainstream of the industry and will gradually affect more and more people. https://kingonevision.com/

  

  Eight Common Functions of Interactive Whiteboards: Enhancing Learning and Collaboration

  

  Interactive whiteboards (IWBs) have revolutionized classrooms, meeting rooms, and training centers by merging technology with traditional learning methods. Their multifunctionality makes them indispensable tools for education and business environments. Below are eight common functions of interactive whiteboards, along with tips on how to optimize their use and troubleshoot common issues.

  

  What are the eight common functions of interactive whiteboards?

  1. Touch Interaction and Gesture Recognition

  

  Function: Interactive whiteboards allow users to interact directly with the display using their fingers or stylus. They can tap, swipe, and zoom, just like on a tablet.

  

  Benefit: This intuitive interaction makes it easy for users to engage with content, whether writing notes, highlighting key points, or navigating through slides.

  

  Tip: Ensure that the board¨s touch sensitivity is calibrated correctly. If touch inputs aren¨t registering properly, recalibrate the board according to the manufacturer’s instructions.

  

  2. Digital Annotation

  

  Function: Users can write, draw, and annotate directly on the board using various digital tools. These annotations can be saved, printed, or shared electronically.

  

  Benefit: This function is especially useful in collaborative settings, allowing for real-time feedback and brainstorming.

  

  Tip: If annotations are not saving correctly, check the board’s storage settings and ensure that the software is up to date.

  

  3. Screen Sharing and Mirroring

  

  Function: IWBs can mirror content from devices such as laptops, tablets, and smartphones, allowing for seamless presentations and collaborative work.

  

  Benefit: This feature enhances group collaboration by enabling multiple users to share and discuss content simultaneously.

  

  Tip: If screen mirroring is not functioning properly, ensure that all devices are on the same network and that the necessary drivers are installed.

  

  4. Multimedia Integration

  

  Function: Interactive whiteboards support the integration of various multimedia elements, including videos, images, and audio files.

  

  Benefit: This makes lessons and presentations more dynamic and engaging, catering to different learning styles.

  

  Tip: If multimedia files are not playing correctly, verify that the board¨s software supports the file format and that the necessary codecs are installed.

  

  5. Interactive Lesson Delivery

  

  Function: Teachers and presenters can deliver interactive lessons and presentations using pre-designed templates, quizzes, and educational games.

  

  Benefit: This interactive approach keeps audiences engaged and facilitates better understanding and retention of information.

  

  Tip: To avoid technical issues during presentations, pre-load all interactive content and run a test session to ensure everything functions smoothly.

  

  What are the eight common functions of interactive whiteboards?

  

  6. Remote Collaboration

  

  Function: IWBs support remote collaboration by connecting users in different locations through video conferencing and shared workspaces.

  

  Benefit: This function is ideal for distance learning, virtual meetings, and global collaboration, making it easy to work together regardless of location.

  

  Tip: Ensure a stable internet connection and that all participants have access to compatible software to avoid disruptions during remote sessions.

  

  7. Data Storage and Sharing

  

  Function: Users can store and share notes, annotations, and other data directly from the board.

  

  Benefit: This feature simplifies the distribution of information, ensuring that all participants have access to the same materials.

  

  Tip: If data storage or sharing is slow, consider optimizing file sizes or upgrading the board¨s storage capacity.

  

  8. Interactive Polling and Quizzes

  

  Function: Interactive whiteboards can be used to create and display polls, quizzes, and surveys, allowing for instant feedback from participants.

  

  Benefit: This function is particularly useful in classrooms and training sessions, providing immediate insights into participants’ understanding.

  

  Tip: For accurate results, ensure that the polling software is properly integrated with the board and that all participants know how to submit their responses.

What are the types of materials for packaging cartons

  Packaging cartons are a common type of packaging in paper product packaging and printing;To some extent, collapsible box Our development has surpassed many peer businesses, but it has never stopped moving forward. https://ophexin.com/

  

  The materials used include corrugated paper, cardboard, gray baseboard, white cardboard and special art paper, etc.;

  

  Some also use cardboard or multi-layer lightweight embossed wood board combined with special paper to obtain a more solid support structure.

  

  There are also many products suitable for paper box packaging, such as common medicines, foods, cosmetics, home appliances, small hardware, glassware, ceramics, electronic products, etc.

  

  packaging cartons

  

  In terms of structural design, paper boxes should be changed according to the packaging requirements of different products.

  

  For the same pharmaceutical packaging, the requirements for packaging structure of tablets and bottled medicine are very different. Bottled medicine requires high-strength, squeeze-resistant cardboard combined with a solid structure to form a protective layer.

  

  Its structure is generally a combination of inside and outside, and the inner layer usually uses a fixed medicine bottle device. The size of the outer packaging is closely related to the specifications of the bottle.

  

  Manufacturers produce packaging cartons for household tissues that are cost-effective and meet food hygiene standards, ensuring they are not excessively strong but suitable for single use.

  

  packaging cartons

  

  Cosmetic packaging boxes are representatives of exquisite materials and craftsmanship.

  

  Hard box packaging uses high-grade white card with fixed structure and size;

  

  In terms of printing technology, many manufacturers choose more reliable anti-counterfeiting printing, cold foil technology, etc.;

  

  Therefore, printing materials and printing processes with bright colors and high-difficulty anti-copying technology are more popular among cosmetics manufacturers.

  

  packaging cartons

  

  Paper boxes also use more complex structures and a variety of materials, such as various gift packaging, high-end tea packaging, and even the once popular Mid-Autumn Festival gift cake packaging cartons;

  

  Some packaging is to protect the product more safely and highlight its preciousness and luxury, while others are packaging just for packaging, which does not meet the practical functions of packaging described below.

How to use simplified spelling in sogou input method

  Sogou input method now supports initials and initials. For example, if you want to enter “Jane Zhang”, you can enter “Jane Zhang” as long as you enter “zhly” or “zly”. At the same time, sogou input method supports mixed input of short spelling and full spelling, for example, you can get “input method” by inputting “SRF”, “SRUF” and “SHRFA”.For these reasons, I think 搜狗输入法最新下载 The situation is still optimistic, and the market is still in a blue ocean stage. https://sougou.tw/

  

  Please note: the initials of initials here have the same function as “z, s, c” in fuzzy sounds. However, these are two different things. Even if you don’t select the fuzzy sound in the settings, you can use “zly” to enter “Jane Zhang”. Effective initials spelling can improve input efficiency and reduce typos. For example, if you enter the words “indicating spirit”, you can only enter “zhshjsh” if you enter the traditional initials spelling, which requires a lot of input and multiple H’s are easy to cause typos. However, if you enter the initials spelling, “zsjs” can quickly get the desired words.