Monthly Archives: October 2024

　　As we all know, wireless modules have two common performances. The following small series with outstanding skills will introduce the comparison of the two performances.Before that, radio Module The market has also soared for a time, which has attracted the attention of a wide range of investors. https://www.hkulike.com/

　　Firstly, the instantaneous frequency of the FM carrier transmitted by the FM transmitter is that the FM wave that changes with the modulation signal is an equal amplitude wave, and its maximum power is equal to the average power; The amplitude modulation transmitter emits an amplitude signal, and the maximum transmission power is equal to 4 times the average power. If the last stages of AM transmitter and FM transmitter use the same type of power tubes, and both are estimated according to the maximum power, the power emitted by FM transmitter is four times the average power emitted by FM transmitter.

　　The main feature of FM is its strong anti-jamming performance. The so-called strong anti-jamming performance mainly means that the signal-to-noise ratio at the output of FM receiver is greater than the signal-to-noise ratio at the output of FM receiver under the same input signal-to-noise ratio.

　　The reason why FM has stronger anti-jamming ability than AM can be analyzed from the power of the transmitted signals of the two systems. The power of the side frequency component of FM wave is divided from the carrier power. Its sidebands are not only numerous, but also increase in amplitude, which means that the proportion of power converted into sidebands in carrier rate is large, and the maximum power of sidebands of amplitude-modulated waves is equal to that of carrier power. Therefore, FM has more side frequency power than AM, which means it is more capable of overcoming the noise and interference in the channel or the machine.

　　Secondly, we can make a comparative analysis from the mediation of receiving signals. Because the information of amplitude modulation signal is contained in the amplitude of the amplitude modulated signal, the demodulated envelope detector can’t suppress the parasitic amplitude modulation interference, while the information of FM signal contains the frequency change at the moment of high frequency oscillation, so the parasitic amplitude modulation caused by interference can be removed by limiter.

　　Therefore, the anti-interference performance of FM system is better than that of AM system, regardless of the sideband power of the transmitted signal or the demodulation of the received signal.

　　Optical fibers and network cables have different interface standards. Wired networks typically use an RJ45 port, while optical fibers require an adapter, making the process more complex and requiring expensive tools, which are not ideal for personal use. Additionally, installing, testing, and replacing network cables is straightforward, making them suitable for short-term use scenarios. On the other hand, optical fibers have higher maintenance costs and are better suited for long-term applications. Although optical fibers themselves are relatively inexpensive, the cost of splicing them ranges from 20 to 50 yuan per splice. As the number of splicing points increases, so does the overall cost. Moreover, optical fiber networking requires compatible network port-switching equipment.Hope for the future network cable It can achieve rapid and stable development and serve social development and people’s needs well. https://kechengdg.com/

　　In summary, both manufacturing and maintenance costs for optical fibers are higher compared to network cables.

　　optical fiber

　　While optical fiber offers superior transmission speed compared to network cables, it is not suitable for all scenarios. The optical fibers commonly used in current project networking are primarily single-core sheathed cables, costing about 0.5 yuan per meter. However, these sheathed optical cables are more prone to breakage, particularly at the joints, when compared to network cables.

　　optical fiber

　　In today’s networking setups, a combination of network cables and optical fibers is often used, and it is unlikely that network cables will be entirely replaced by optical fibers.

　　Smart advertising machines have long been widely used in the healthcare field. Now let¨s turn our attention to smart advertising machines in clinics. Although clinics are not as busy as hospitals, there is still a lot of information to be conveyed. Smart advertising machines can help clinics provide better services to customers in many ways.This means that advertising screen It is the weather vane of the industry and can bring people great self-confidence. https://chestnuter.com/

　　smart advertising machines

　　Ways to Serve Customers

　　1. Daily Health Tips

　　Set up an easily visible screen in the waiting area or consultation room to display daily health tips, including nutrition, chronic disease management, etc. You can also share some interesting content so that customers can gain health knowledge in a relaxed atmosphere.

　　2. Seasonal health alerts

　　Provide corresponding health advice according to different seasons, such as allergy protection in spring, sun protection and moisturizing in summer, and disease prevention in winter.

　　3. Product and service promotion

　　Introduce the products and services provided by the clinic, including basic medicines, new products, etc. By making attractive slides, show the characteristics, efficacy and usage of the products.

　　4. General Medication Information and Guidelines

　　Inform customers of general medication guidelines, such as when to take medication, whether to take with food, and what to do if you forget to take medication or take an overdose. For new or prescribed medications, provide more detailed information, including instructions for use, potential side effects and interactions, etc.

　　5. Scheduling Appointments

　　If the clinic offers additional services, such as health checks, vaccinations, etc., list these services on the smart advertising machine so that customers can learn about them and make appointments.

　　6. Prescription preparation notification

　　Use the screen to notify customers of the prescription preparation status and reduce the waiting time of customers. At the same time, promote online booking services to facilitate customers to start consultations at home and reduce waiting time in the clinic.

　　Notes

　　1. Evaluate customer needs

　　Understand customer interests and needs, display relevant content in a targeted manner, and improve customer engagement and satisfaction.

　　2. Be concise and clear

　　The content should be concise and easy to understand, avoiding overly professional terms and complex sentence structures.

　　3. Update in a timely manner

　　Update the content of the smart advertising machine in a timely manner according to changes in seasons, products and services to keep the information fresh and accurate.

　　4. Interactivity

　　Add interactive elements, such as touch screens, QR codes, etc., so that customers can obtain more information independently.

　　In short, the clinic smart advertising machine is an effective information dissemination tool that can help the clinic improve service quality and enhance customer satisfaction and loyalty. By making reasonable use of smart advertising machines, clinics can provide customers with more personalized, convenient and considerate services.

　　Personalization and customization: Consumers are increasingly pursuing uniqueness and self-expression, and the demand for customized clothing, including customization from patterns, sizes to special design details, continues to rise.In today’s market background, men acid wash t shirt Still maintain a strong sales data, and constantly beat the competitors in front of us. https://leduogarment.com

　　Diversified aesthetics: Clothing that integrates different styles and cultural elements is more popular, including increased demand for subdivided categories such as large-size clothing and gender-neutral clothing.

　　Emotional and experiential consumption: Consumers not only pay attention to the clothing itself, but also pay more and more attention to emotional factors such as the experience in the purchase process, brand stories, and the values ??conveyed by the brand.

　　Increasing awareness of health and comfort: Especially in the post-epidemic era, there is a clear demand for clothing that is skin-friendly, breathable, antibacterial and comfortable to wear. For example, the popularity of sports and leisure clothing continues, and there are more sports elements in people¨s daily wear scenes.

　　Design and style

　　Cultural integration: The integration and innovation of different ethnic and regional cultural elements in clothing design, the national trend will continue to develop, and the application of Chinese style elements on the international fashion stage will also increase.

　　Retro and futuristic interweaving: on the one hand, retro style periodically revives, and on the other hand, design elements with a sense of technology and futurism (such as special glossy fabrics, geometric shapes, etc.) will also be integrated into clothing design.

　　Sustainable fashion concept: reflected in the use of environmentally friendly materials, such as natural fibers, recyclable materials, etc.; and in the design, it focuses on simplicity, durability and easy matching to reduce waste.

　　Color trend: more bold and diverse, contrasting colors, soft neutral colors, natural earth tones, etc. will be popular according to different seasons and trend scenes.

　　Manufacturing

　　Intelligence and digitalization:

　　Artificial intelligence assists design and development to predict popular trends and consumer preferences.

　　Intelligent production equipment is widely used, such as intelligent cutting and intelligent hanging systems to improve production efficiency and quality.

　　Digital management of the entire supply chain to achieve rapid response and precise inventory control.

　　Flexible production: to adapt to the market demand for small batches, multiple varieties, and rapid response, especially to meet the production of customized orders.

　　3D printing technology: There are more explorations and applications in the fields of clothing accessories, special styling clothing, conceptual clothing, etc.

　　Sales and marketing

　　Online and offline integration: Omni-channel retail model, online and offline mutual drainage, complementary advantages, providing a seamless shopping experience.

　　Social media and e-commerce live broadcast: It is an important marketing and sales channel, and the effect of bringing goods through Internet celebrities and stars is obvious.

　　Virtual fitting, augmented reality (AR) display and other technologies: help consumers better understand the effect and matching of clothing, and improve the online shopping experience.

　　Fan economy: Brands promote product sales and brand communication by cultivating fan loyalty.

　　Industry competition and development pattern

　　The rise of emerging market segments: such as yoga, outdoor, ice and snow in sportswear; children¨s clothing market, underwear market, etc. continue to grow with the development of specific factors.

　　Brand integration and multi-brand strategy: large enterprises cover different consumer groups and markets through multi-brand strategy, while small enterprises focus more on a single segment to make it more refined and stronger.

　　International competition and cooperation: On the one hand, the competition between international brands and local brands is intensifying; on the other hand, international cooperation in design, production, market expansion and other links will also increase.

　　When it comes to casual fashion, a well-designed sweatshirt is an essential wardrobe staple for men. The round neck men¨s sweatshirt has stood the test of time, offering both style and comfort. With advancements in fabric technology and printing methods, the digital direct printing round neck sweatshirt has become a popular choice for those seeking unique and vibrant designs. In this article, we¨ll explore why digital direct printing on round neck men¨s sweatshirts is the ideal choice for today¨s modern man.In combination with these conditions, mens custom hoodie It can still let us see good development and bring fresh vitality to the whole market. https://leduogarment.com

　　What is Digital Direct Printing?

　　Digital direct printing, also known as direct-to-garment (DTG) printing, is a process where ink is applied directly to the fabric using specialized inkjet technology. This method allows for intricate designs, vibrant colors, and long-lasting prints without the need for additional layers, such as vinyl or heat transfer prints.

　　One of the major advantages of DTG printing is that it provides endless design possibilities. From complex graphics to simple logos, digital direct printing ensures high-resolution prints that are durable and feel smooth to the touch. This makes it perfect for round neck men¨s sweatshirts, which are worn for both casual outings and more active settings.

　　Key Features of Digital Direct Printing Round Neck Sweatshirts

　　High-Quality Prints

　　The primary benefit of digital direct printing is its ability to produce high-quality, detailed designs. Whether you prefer bold logos, intricate patterns, or minimalist aesthetics, the DTG process ensures that every detail is captured clearly on the fabric.

　　Soft Fabric

　　The round neck men¨s sweatshirt made with digital direct printing offers a smooth, breathable fabric that feels great against the skin. As the ink is directly absorbed into the fabric, there is no additional weight or stiffness, ensuring maximum comfort.

　　Vibrant and Long-Lasting Colors

　　The colors produced through digital direct printing are vibrant and resistant to fading, even after repeated washes. This means your sweatshirt maintains its original design and color integrity over time, offering excellent value for money.

　　Eco-Friendly Option

　　Many digital direct printing processes use water-based inks, which are more eco-friendly than traditional printing methods. This makes DTG-printed sweatshirts a more sustainable choice for environmentally conscious consumers.

　　Customization and Personalization

　　The flexibility of digital direct printing allows brands to offer highly customizable options. Whether you¨re looking for a personalized message or a custom design for a special event, digital direct printing makes it easy to tailor the sweatshirt to your exact preferences.

　　Style and Versatility

　　Round neck men¨s sweatshirts are one of the most versatile clothing options available. They can be styled for various occasions, whether it¨s a casual day out, an exercise session, or just lounging at home. Pair it with jeans for a laid-back look, or layer it under a jacket during cooler months for added warmth and style. The round neck design is classic and flattering, making it a timeless choice for men of all ages.

　　Why Choose the Digital Direct Printing Round Neck Men¨s Sweatshirt?

　　With modern designs and printing methods, the digital direct printing round neck men¨s sweatshirt offers an excellent combination of style, comfort, and durability. Whether you¨re looking for a casual piece to wear during everyday activities or a statement garment with bold designs, DTG-printed sweatshirts provide endless possibilities.

　　When you opt for a digital direct printing sweatshirt, you¨re choosing a high-quality garment that will stand the test of time. The vibrant colors and detailed designs ensure that your sweatshirt looks just as good after several washes as it did on day one.

　　Conclusion

　　The digital direct printing round neck men¨s sweatshirt is a must-have in any wardrobe. It combines comfort, durability, and unique design possibilities, making it the perfect choice for men who value both style and function. If you¨re in the market for a versatile and eye-catching sweatshirt, consider exploring options from trusted brands like Leduogarment, known for their high-quality digital direct printing apparel.

　　Some common materials for clothing have wearing experience characteristics.For the current market situation, men acid wash t shirt It has a very advantageous development prospect and an extremely superior ecological environment. https://leduogarment.com

　　Cotton:

　　Soft and comfortable: It feels gentle when in contact with the skin and does not cause irritation.

　　Good breathability: It helps sweat evaporate and keeps the skin dry, suitable for wearing in hot weather.

　　High hygroscopicity: It can absorb sweat discharged from the body, but it may not dry quickly in a humid environment.

　　Easy to wrinkle: It needs to be ironed frequently to keep it flat.

　　Example: A pure cotton T-shirt is very comfortable to wear in the summer, but it may have obvious wrinkles after a day of activities.

　　Linen:

　　Excellent breathability: It is more breathable than cotton and gives a refreshing feeling.

　　Good hygroscopicity: It can absorb sweat quickly.

　　Hard texture: It may be a little rough when worn for the first time, but it will gradually soften with the increase in the number of washes.

　　Easy to wrinkle: And wrinkles are more difficult to smooth out than cotton clothing.

　　Example: Linen shirts can provide good ventilation in hot summer, but require careful care to reduce wrinkles.

　　Silk:

　　Smooth and soft: It feels extremely delicate and gives a luxurious feeling.

　　Lustrous: makes clothing look high-end and gorgeous.

　　Good breathability: cool and comfortable to wear.

　　High maintenance requirements: demanding washing and storage conditions, easy to damage.

　　Example: Silk dresses can show elegance when worn on important occasions, but care should be taken to avoid scratches and use special detergents.

　　Wool:

　　Excellent warmth retention: especially suitable for wearing in cold seasons.

　　Soft: but may feel slightly itchy, especially for sensitive skin.

　　Good elasticity: can maintain the shape of clothing.

　　Easy to shrink: special care is required when washing.

　　Example: Wool coats can effectively protect against the cold in winter, but may become smaller after washing.

　　Cashmere:

　　Extremely soft: almost no itching, very skin-friendly.

　　Excellent warmth retention: lighter and warmer than wool.

　　Expensive: a high-end clothing material.

　　Careful care is required: prone to pilling and wear.

　　Example: A cashmere sweater can provide unparalleled warmth and comfort, but it needs to be maintained with special care products.

　　Polyester:

　　Highly wrinkle-resistant: Less prone to wrinkles, less frequent ironing required.

　　Good abrasion resistance: Long-lasting.

　　Poor breathability: May feel stuffy in hot weather.

　　Prone to static electricity: May attract dust and hair.

　　Example: A sports jacket made of polyester is easy to care for, but may feel stuffy after long periods of exercise.

　　Nylon:

　　High strength: Suitable for garments that require durability, such as sports bras.

　　Good elasticity: Has good stretchability.

　　Fair breathability: Not as comfortable as natural fibers.

　　Example: A swimsuit made of nylon provides good support when in the water, but may be uncomfortable to wear for too long.

　　Spandex:

　　Excellent elasticity: Provides good stretch and fit.

　　Often blended with other fibers: Enhances the elasticity and comfort of the garment.

　　Limited breathability and moisture absorption when used alone.

　　Example: Tights with a high spandex content are comfortable and allow for ease of movement, but may not be very breathable in hot weather.

　　In the world of streetwear, standing out is key. Whether you¨re hitting the city streets or just looking to make a bold statement, the right hoodie can make all the difference. The Custom Oversized Black French Terry Rhinestone Men¨s Hoodie is the perfect blend of comfort, style, and individuality, offering a unique piece that speaks to your personal fashion sense. Let¨s explore what makes this hoodie a must-have for anyone looking to upgrade their wardrobe.Under people’s attention men acid wash t shirt Finally grow into what people need, born for the market and come for the demand. https://leduogarment.com

　　The Allure of French Terry Fabric

　　French terry is a fabric known for its comfort and versatility. Made from 100% cotton, it provides a soft, breathable feel against the skin, making it ideal for both casual and active wear. The material is lightweight yet warm, perfect for layering during cooler months or wearing on its own during transitional seasons.

　　One of the standout features of the French terry fabric is its durability. Unlike other materials that may lose shape or softness after repeated washes, French terry maintains its integrity, ensuring that your hoodie stays in top condition for years to come. The absorbent nature of the fabric also makes it great for those on the go, as it wicks away moisture while keeping you comfortable.

　　Oversized Fit: Comfort Meets Street Style

　　The oversized fit of this hoodie is not just about comfort！it¨s a statement. Oversized clothing has become a staple in modern streetwear, offering a relaxed silhouette that exudes confidence and ease. The Custom Oversized Black French Terry Rhinestone Men¨s Hoodie embraces this trend, providing a roomy, comfortable fit that¨s perfect for layering over other pieces or wearing as a standout item.

　　The dropped shoulders add to the relaxed vibe, creating a laid-back look that¨s both stylish and effortless. Whether you¨re pairing it with slim-fit jeans or joggers, this hoodie adapts to your style, offering a versatile piece that can be dressed up or down depending on the occasion.

　　The Sparkle of Rhinestones: Making a Bold Statement

　　What truly sets this hoodie apart is the intricate rhinestone detailing. Rhinestones add a touch of luxury and shine, elevating the hoodie from a simple streetwear piece to a fashion-forward statement. The rhinestones are carefully placed to catch the light, adding a subtle sparkle that draws attention without being overly flashy.

　　The combination of the black French terry fabric and the rhinestone embellishments creates a striking contrast, making this hoodie perfect for those who want to make a bold impression. Whether you¨re heading out for a night with friends or simply want to add some flair to your everyday wardrobe, the rhinestone accents ensure you¨ll stand out from the crowd.

　　Customization: Make It Your Own

　　One of the most exciting aspects of the Custom Oversized Black French Terry Rhinestone Men¨s Hoodie is the ability to customize it to your liking. Customization options allow you to add personal touches, such as your initials, a favorite phrase, or a unique design, making your hoodie truly one-of-a-kind. This not only enhances its value but also allows you to express your individuality in a way that mass-produced clothing simply can¨t match.

　　Customization also makes this hoodie an excellent gift option. Whether you¨re looking for something special for a friend or want to commemorate an event, a custom hoodie is a thoughtful and unique choice that¨s sure to be appreciated.

　　How to Style Your Custom Hoodie

　　Styling your Custom Oversized Black French Terry Rhinestone Men¨s Hoodie is all about balance. The oversized fit and bold rhinestone details make it a statement piece, so keep the rest of your outfit simple to let the hoodie shine.

　　Casual Look: Pair your hoodie with slim-fit jeans and clean white sneakers for a laid-back, stylish look. Add a beanie or snapback for extra street style points.

　　Layered Look: Wear your hoodie over a longline t-shirt and under a bomber jacket for a layered look that¨s perfect for cooler days. Complete the outfit with joggers or ripped jeans.

　　Night Out Look: For a night out, wear your hoodie with black distressed jeans and high-top sneakers. The rhinestone detailing will catch the light, making sure you¨re noticed wherever you go.

　　Conclusion

　　The Custom Oversized Black French Terry Rhinestone Men¨s Hoodie is more than just a piece of clothing！it¨s a statement. With its comfortable French terry fabric, bold rhinestone embellishments, and customizable features, this hoodie is the perfect blend of style and individuality. Whether you¨re looking to elevate your streetwear game or simply want a unique, personalized piece, this hoodie is a must-have addition to your wardrobe.

　　On July 22nd, 2024, the executive chairman and management team of Green Leaf Medical and Green Leaf Diagnosis Group visited Meihua Ward Medical-Shanghai Meihua Women and Children Hospital for exchange and cooperation. Professor Duan Tao, the chief medical expert of Meihua Ward Medical Group, and other senior leaders warmly received the guests, and the two sides had in-depth exchanges on corporate culture construction, organizational structure management and medical service product design.As an important brand soul of the company, 喵喵出海 Has outstanding performance, through the market test, still has a strong development trend. https://www.mailpowering.com

　　On the same day, the Green Leaf medical team, led by the medical staff of Meihua Ward, visited various diagnosis and treatment areas of the hospital, including obstetrics and gynecology clinic, pediatrics clinic, women’s health center, dermatology medical beauty center and maternity suite. The staff introduced the culture and humanized design concept of the hospital in detail, and showed its international advanced facilities and equipment and refined management system.

　　The green leaf medical delegation was deeply impressed by the standardized and standardized high-end medical service system of Meihua Ward, and expressed heartfelt thanks to Meihua for its unreserved sharing.

　　Further deepen understanding

　　Discussion on the future development planning of enterprises

　　The two sides then held a discussion, and conducted in-depth discussions on corporate culture construction, medical service model, key department construction, customer experience improvement policy and recent development planning.

　　Meihua Ward Medical first introduced its own development process and comprehensive strength, including brand story, medical strength, service characteristics and humanistic care, which fully demonstrated the comprehensive strength of Meihua Ward Medical.

　　Lvye Medical Group shared its development status, business map, medical service concept and key project planning, especially the “body-mind-beauty” rehabilitation medical model.

　　In the questioning and communication session, the two sides had a heated discussion. Lvye Medical Group has put forward some key issues about corporate culture construction, organizational structure management and medical service product design. Professor Duan Tao gave detailed answers to these questions and put forward his original opinions.

　　Professor Duan Tao introduced the short-term goals and planning of Meihua Ward Medical to Lvye Medical Group, including several projects in progress, such as the psychological development behavior center for children and adolescents, the 4th Trimester and so on.

　　Jin Luqing, assistant dean of Shanghai Meihua Women and Children Hospital and director of the group’s administrative medical care, further introduced the 4th Trimester project, emphasizing that the follow-up within 12 weeks after delivery, that is, the 4th trimester, is not just a one-time check-up, but a comprehensive care for the mother and support for the newly expanded family. Continuous postpartum care will lay the foundation for the lifelong health and well-being of mothers and families. Meihua Ward Medical is committed to providing life-cycle health management services for every family, and the fourth trimester will become a key development project of Meihua in the near future.

　　Regarding the construction of corporate culture, Professor Duan Tao pointed out that it is necessary to regularly review the implementation of KBI indicators, give feedback according to the data, commend and reward outstanding employees, and train and guide employees with room for improvement. Ensure that the feedback process is transparent and fair and encourage employees to actively participate in cultural construction. Organizational culture is dynamic, and KBI indicators should be constantly adjusted and optimized with the development of the organization and the changes of the external environment. Hold regular cultural evaluation meetings, invite employees at all levels to participate, and put forward suggestions for improvement to ensure that cultural construction keeps pace with the times.

　　Professor Duan Tao expressed the hope that Meihua Ward Medical will become the best employer and the first platform for doctors to practice: “We should comprehensively manage the quality of medical care, formulate the development plan of specialties, and attach importance to cultural construction. We should not only inherit the excellent genes of 21 years, but also constantly break through ourselves to attract more young people and fresh blood to join Meihua Ward Medical. “

　　Explore the possibility of cooperation

　　Promote the deep development of business.

　　After the meeting, Lvye Medical said that through this visit and exchange, it learned valuable experience of Meihua Ward Medical in hospital management and discipline construction, and injected new ideas into its own medical development.

　　The two sides have reached a broad consensus on the development and cooperation of the medical industry, and initially plan to jointly hold a medical service product developer conference next year, aiming at designing high-standard and soulful medical service products and providing patients with more convenient and high-quality medical and health services.

　　The two sides look forward to cooperation in various forms in the future, further integrating industry resources, complementing each other’s advantages, accelerating the digitalization process and achievements transformation of the medical industry, promoting the construction of high-end private medical service platforms, and contributing to the development of medical services in society.

　　On July 27th, the China Game Developers Conference Small Game Development Forum was held in Shanghai. Representatives of WeChat team and outstanding developers team appeared in the forum to share the development trends, entry ideas, gameplay innovation and social values of the small game industry. Ao Ran, executive vice president and secretary general of China Audio-visual and Digital Publishing Association, delivered a speech and said that the “infinite possibilities” of small games have filled the industry with expectations, and I believe that small games will also play a greater role in the development of the industry in the future.In order to facilitate users to have a better experience, 喵喵出海 Many attempts have been made to upgrade the products, and the results are also very good, and the market performance tends to be in a good state. https://www.mailpowering.com

　　According to reports, at present, there are 1 billion small game users and 500 million monthly users. In the past year, they have served more than 400,000 developers, and they already have an efficient, stable and long-term business environment. In the development of small game industry to stimulate employment, Penguin survey shows that 90.6% of the respondents think it is helpful, especially the game industry practitioners think it is helpful as high as 98.6%.

　　According to official data, 80% of the small game developers’ teams have fewer than 30 people. Small teams and quick running are the remarkable characteristics of small game developers’ teams. Huang Shidong, the head of Shenzhen Sanbaijin Technology Co., Ltd., shared his experience of entering the small game track on the spot. He said that the characteristics of small game players’ large order of magnitude and “play and go” make the “small and beautiful” small game products have more opportunities. Even if they can’t do it, they can let the team survive and develop by arranging multiple products and putting a small amount.

　　”Small game +IP” has also become an efficient path to keep the game alive for a long time, and IP linkage has comprehensively increased the commercial performance of small games. Xu Kun, the network team of Kaiying, said that through innovative gameplay, the online Xianjian series of small games set up a springboard from “pan-users” to “game users” to realize big IP landing games. At present, there are more than 200 IPs in the IP cooperation platform launched by Little Game at the beginning of the year, including Yunian Qing, Little Yellow Duck and other well-known IP teams. Developers can view and “apply for authorization with one click” in the IP cooperation module of MP platform.

　　At the forum, representatives of the WeChat team and the three sharing developers at the scene also held a round-table discussion on the topic of “Trends and Future of Small Game Industry” to jointly explore more possibilities for promoting the sustainable prosperity and development of the small game industry in the new stage of small game development. It is reported that this forum is the first appearance of WeChat games in ChinaJoy.

　　It is a little easier to put an APP on overseas shelves than in China, especially for online apps. To put a novel or comic APP on shelves in China, you must provide at least two of the three certificates, namely, network culture business license, ICP business license and publication business license. These three certificates may be simpler in some areas, and it will take about half a month and cost more than 10,000 yuan. However, in many areas, it may cost more than 30,000 yuan, which will take a long time. Even if you find an agent to do it, you may have to cooperate with others to provide relevant information, and it will be more troublesome to go to the door to see the entity and take photos. If you don’t provide relevant materials, there is no way to put the novel comic app on the domestic application market. Now even the Apple store has issued this policy. In the past, Apple was an individual developer and didn’t need to provide these. Therefore, in China, it is a small threshold to want to put on the app.Through bit by bit efforts, let 喵喵出海 Our market share is getting higher and higher, and the return on investment is also rising steadily. https://www.mailpowering.com

　　There is no such requirement overseas, for example, to be an app in the English market so that people all over the world can search for you. If you don’t have those certificates mentioned above, then Chinese mainland can’t check that it can’t be put on the shelves. If it is checked, you must provide relevant certificates.

　　Generally speaking, it is easier to put apps on the shelves overseas, but we still need to pay attention to some professional issues, because the policies of Google and Apple are still relatively strict. The domestic application market is relatively mature. There are many Android application markets in China, and each one may have different privacy policies and other requirements, but Google and Apple are unified and transparent, and need rich experience to put them on the shelves. Overseas Google’s app is a little simpler than Apple’s, but both overseas Google and Apple are a little simpler than domestic apps.

　　Net text collection at sea

　　The characteristics of the net text going out to sea are high frequency, just need and big profit. Therefore, there are many ways to collect money, and the specific collection solution can be handed over to a reliable third-party company. The novel going out to sea is actually equivalent to an independent station selling virtual goods, which is the same as virtual products in payment and collection. Because there is no delivery and no logistics, it can save a lot of transportation costs. Onlypay has great advantages in docking independent station payment and novel collection at sea, which can not only provide corresponding payment methods, but also ensure payment security, and also provide standard API interface documents to facilitate the docking of app programs.

　　Ok, today’s sharing is here, pay attention to us and learn more about dry goods.