Monthly Archives: September 2024

　　In today’s security landscape, motion detectors are essential for protecting both residential and commercial properties. Among these devices, Passive Infrared (PIR) detectors are especially popular due to their effectiveness in detecting movement. When it comes to choosing between wireless and wired outdoor PIR detectors, there are several factors to consider, including installation, maintenance, reliability, and cost. This article will delve into the key differences to help you make an informed decision.More importantly, put passive infrared sensor It is imperative for us to make thorough analysis and maximize its social function. https://www.sunlit-tech.com

　　1. Installation and Flexibility

　　Wireless Outdoor PIR Detectors:

　　Wireless motion sensors, such as the wireless motion sensor, offer significant advantages in terms of installation flexibility. These detectors don’t require extensive wiring, allowing them to be installed in various locations without the need for professional help. This makes them ideal for places where running wires is difficult, such as older buildings or outdoor areas. The ease of installation also means you can set up a comprehensive security system quickly and with minimal disruption.

　　Wired PIR Detectors:

　　On the other hand, wired PIR movement detectors require a more complex installation process. This involves running cables through walls, ceilings, or underground, which can be time-consuming and may require professional installation. However, once installed, wired detectors provide a stable and reliable connection that is not subject to wireless interference. This can be particularly beneficial in areas with a lot of electronic devices that might disrupt wireless signals.

　　2. Power Source and Maintenance

　　Wireless Outdoor PIR Detectors:

　　Wireless pir movement detector are typically battery-powered. While this allows for flexible placement, it also means that the batteries will need to be replaced periodically. Depending on the model and usage, battery life can range from several months to a few years. Some advanced wireless detectors come with features like power-saving modes and low-battery alerts to help manage this maintenance task.

　　Wired PIR Detectors:

　　In contrast, wired detectors draw power directly from the electrical system, eliminating the need for battery replacements. This ensures continuous operation without the risk of a detector going offline due to a dead battery. However, it does mean that the installation needs to include considerations for electrical wiring, which can add to the complexity and cost.

　　3. Connectivity and Reliability

　　Wireless Outdoor PIR Detectors:

　　One of the biggest advantages of wireless motion detectors is their ability to integrate with modern smart home systems. These detectors can connect to your home network, allowing you to monitor and control them remotely via your smartphone or other devices. They can send real-time alerts, enhancing your overall security. However, wireless signals can be susceptible to interference from other electronic devices, which might affect their reliability.

　　Wired PIR Detectors:

　　Wired PIR movement detectors are known for their reliability. Since they are hardwired, they are not affected by wireless interference, providing a stable connection to your security system. This makes them a good choice for environments with high levels of electronic noise. Additionally, wired detectors are less vulnerable to hacking compared to their wireless counterparts, offering an extra layer of security.

　　4. Security and Scalability

　　Wireless Outdoor PIR Detectors:

　　Wireless motion detectors are easily scalable. You can add more detectors to your system without the need for additional wiring, making it simple to expand your security coverage as needed. Their integration with smart home systems also means they can work in tandem with other security devices like cameras and alarms, providing a comprehensive security solution.

　　Wired PIR Detectors:

　　Scaling a wired system is more complex due to the need for additional wiring. However, for stable environments where the security setup is unlikely to change, wired systems offer robust and reliable protection. They are also less prone to interference and hacking, which can be crucial for high-security applications.

　　When deciding between wireless outdoor PIR detectors and wired models, consider your specific needs and circumstances. Wireless motion sensors offer flexibility, easy installation, and integration with modern smart home systems, making them ideal for dynamic and evolving security needs. Wired PIR movement detectors, however, provide unmatched reliability and stable performance, especially in environments with a lot of electronic interference. By weighing these factors, you can choose the PIR detector type that best suits your security requirements and provides peace of mind

　　In emergency situations, visibility is paramount. The LED Round Beacon Light from Mascarello offers exceptional brightness, ensuring that emergency vehicles are seen from a distance, even in adverse weather conditions. These strobe lights cut through fog, rain, and darkness, providing a clear signal to other drivers and pedestrians.The data shows that, led strobe warning lights Its development potential should not be underestimated, and it is also the inevitability of its existence. https://www.lkx-mascarello.com

　　1. Durable and Reliable Construction

　　Built with a sturdy aluminium screws base, the Mascarello strobe lights are designed to withstand the rigors of emergency use. Whether it’s mounted on a police car, ambulance, or fire truck, this light remains securely in place, offering reliable performance when it matters most.

　　Why the LED Round Beacon Light is Essential for Emergency Situations

　　2. Versatile Applications

　　Not only are these strobe lights essential for emergency vehicles, but they also serve a variety of industrial applications. From construction sites to roadside assistance, the LED Round Beacon Light enhances safety wherever high visibility is required. As a trusted strobe lights supplier, Mascarello provides products that meet the highest standards of quality and reliability.

　　Why the LED Round Beacon Light is Essential for Emergency Situations

　　3. Easy Installation and Maintenance

　　The LED Round Beacon Light is designed for easy installation, allowing emergency personnel to quickly equip their vehicles without hassle. Additionally, the low maintenance requirements ensure that these lights remain operational for long periods, reducing downtime and maintenance costs.

　　Why the LED Round Beacon Light is Essential for Emergency Situations

　　4. Cost-Effective Solution

　　Investing in high-quality emergency vehicle lights is crucial for safety and efficiency. Mascarello’s LED Round Beacon Light offers a cost-effective solution without compromising on performance. By providing reliable, long-lasting illumination, these lights help emergency services operate more effectively and safely.

　　The LED round beacon light from Mascarello is an indispensable tool for emergency situations. With its superior visibility, durable construction, and versatile applications, it ensures that emergency vehicles are always seen and can respond swiftly. For those looking for reliable and effective strobe lights, Mascarello is a trusted supplier providing top-notch products.

　　A memory foam travel neck pillow is a must-have for anyone seeking ultimate comfort during long journeys, whether by plane, train, or car. These pillows are designed to provide support and reduce neck strain, but not all are created equal. To ensure you select the best memory foam travel neck pillow for your needs, follow these essential tips:In order to open the market, travel pillow memory foam Constantly improve the ability of business development and create an extraordinary brand image for it. https://tainengjikang.com/

　　How to Choose the Best Memory Foam Travel Neck Pillow for Ultimate Comfort

　　1. Assess the Quality of Memory Foam

　　Tip: The quality of memory foam greatly impacts comfort and support. Look for pillows made from high-density memory foam that offers better cushioning and conforms to your neck’s natural curve.

　　Feature: High-density memory foam provides superior support and durability. It should quickly return to its original shape after use, ensuring consistent comfort throughout your travels.

　　2. Evaluate the Pillow Shape and Design

　　Tip: The shape and design of the pillow play a crucial role in providing ergonomic support. Choose a pillow with a contour that supports the neck and head comfortably.

　　Feature: Look for designs with a U-shape or contoured edges that fit snugly around your neck. Some pillows come with adjustable features or extra padding for customizable support.

　　3. Check for Adjustable Features

　　Tip: Adjustable features can enhance comfort by allowing you to tailor the pillow to your specific needs. This is especially useful for different sleeping positions or neck sizes.

　　Feature: Consider pillows with adjustable straps, removable inserts, or inflatable components. These features let you modify the pillow¨s firmness and support level for a personalized fit.

　　4. Examine the Cover Material

　　Tip: The cover material affects both comfort and hygiene. Opt for a cover that is soft, breathable, and easy to clean.

　　Feature: Choose a pillow with a removable, washable cover made from materials like cotton, velour, or a moisture-wicking fabric. Breathable materials help keep you cool and comfortable during extended use.

　　5. Consider Portability and Storage

　　Tip: Portability is essential for travel. The pillow should be easy to carry and store without taking up too much space.

　　Feature: Look for pillows that come with a carrying case or can be easily compressed for packing. Some travel pillows have a snap closure or strap that allows them to attach to your luggage for convenient transport.

　　6. Look for Additional Comfort Features

　　Tip: Extra features can enhance the overall comfort and functionality of the pillow. Consider additional elements that contribute to a better travel experience.

　　Feature: Some pillows include built-in neck support, adjustable headrests, or integrated massagers. Features like these can provide extra relaxation and alleviate travel-related discomfort.

　　7. Check for Durability and Longevity

　　Tip: A travel pillow should be durable enough to withstand frequent use. Evaluate the pillow¨s construction and material quality for long-term reliability.

　　Feature: Opt for pillows with sturdy seams, high-quality foam, and reinforced edges. A well-constructed pillow will maintain its shape and support over time, ensuring lasting comfort.

　　8. Read Reviews and Ratings

　　Tip: Customer reviews and ratings provide valuable insights into the pillow¨s performance and comfort level. Look for feedback from other travelers to gauge the effectiveness of the pillow.

　　Feature: Pay attention to reviews that mention comfort, support, and durability. High ratings and positive feedback from users can indicate a reliable and comfortable travel pillow.

　　9. Consider Price and Value

　　Tip: While it¨s important to invest in a quality travel pillow, it should also fit within your budget. Find a balance between cost and features to ensure you get the best value for your money.

　　Feature: Compare options within your price range and assess the features offered. A higher price does not always guarantee better quality, so consider all aspects to make an informed decision.

　　The mold steel material used in mold parts processing has high hardness, and the mold processing equipment is required to have thermal stability and high reliability.If we can practice these points, plastic moulding parts Will be unique, become a leader in the industry, and keep moving forward. https://www.dghrjmmj.com

　　For complex cavities and multifunctional composite molds, as the shape of the parts becomes more complicated, the design and manufacturing level of the mold must be improved. Multifunctional composite molds that form or assemble multiple grooves and multiple materials in a set of molds require a large amount of processing programming, high deep hole comprehensive cutting ability and high stability, which increases the difficulty of processing. The processing quality of mold parts includes processing accuracy and surface quality: processing accuracy is the degree of conformity between the three geometric parameters of the actual size, shape, and position of the surface of the part after processing and the ideal geometric parameters required by the drawing; the deviation value between the actual geometric parameters of the part and the ideal geometric parameters is called processing error.

　　Processing accuracy and processing error are both terms for evaluating the geometric parameters of the processing surface. Processing accuracy is measured by tolerance grade. The smaller the grade value, the higher the accuracy; processing error is expressed by numerical value. The larger the numerical value, the greater the error. High processing accuracy means small processing error, and vice versa; the actual parameters obtained by any processing method will not be absolutely accurate. From the function of the part, as long as the processing error is within the tolerance range required by the part drawing, it is considered that the processing accuracy is guaranteed.

　　The quality of a machine depends on the processing quality of the parts and the assembly quality of the machine. The processing quality of the parts includes two parts: processing accuracy and surface quality. Machining accuracy refers to the degree to which the actual geometric parameters (size, shape and position) of the parts after processing are consistent with the ideal geometric parameters. The difference between them is called processing error. The size of the processing error reflects the level of processing accuracy. The larger the error, the lower the processing accuracy, and the smaller the error, the higher the processing accuracy; the main aspects that affect processing accuracy: dimensional accuracy, the degree to which the actual size of the part after processing is consistent with the center of the tolerance zone of the part size.

　　When it comes to enhancing vehicle safety and visibility, truck lights play a crucial role. While most truck owners are familiar with basic lighting features, there¨s much more to truck lights than meets the eye. As a professional in the field of vehicle lighting, particularly focusing on truck LED warning lights, we delve into some lesser-known facts and insights about these essential components.Truck LED warning lights are indispensable for ensuring safety on the road. These lights are designed to alert other drivers to the presence of a large vehicle, especially in challenging conditions such as fog, rain, or low light. Their high visibility helps prevent accidents and enhances the safety of both truck drivers and other road users.Doing these simple things can also make led emergency warning lights Sowing high-quality genes will eventually grow into towering trees and become the leader in the industry. https://www.lkx-mascarello.com

　　1. Advanced Technology in LED Warning Lights

　　Truck LED warning lights are at the forefront of lighting technology. Unlike traditional halogen lights, LED lights offer superior brightness, longer lifespan, and lower energy consumption. This makes them an ideal choice for trucks that require reliable and powerful lighting solutions. Modern LED warning lights are equipped with advanced features like strobe effects and customizable patterns, providing flexibility to meet various safety and visibility needs.

　　2. Manufacturing Excellence: The Role of Truck LED Warning Light Factories

　　The production of truck LED warning lights involves intricate processes to ensure high quality and durability. Truck LED warning light factories utilize cutting-edge technology and stringent quality control measures to produce lights that meet industry standards. These facilities are equipped with state-of-the-art machinery to handle the precision requirements of LED technology, ensuring that every light produced offers optimal performance and reliability.

　　What You Didnt Know About Truck Lights

　　What You Didnt Know About Truck Lights

　　3. The Expertise of Truck LED Warning Light Manufacturers

　　Truck LED warning light manufacturers play a pivotal role in the development and distribution of these crucial components. Longkexin focus on designing lights that not only enhance visibility but also withstand the harsh conditions encountered in trucking environments. Longkexin manufacturers invest in research and development to continually improve their products, integrating features such as water resistance, shock resistance, and enhanced brightness. Longkexin ensures that truck lights are both functional and durable, providing long-term value to truck operators.

　　4. Versatility of Truck LED Strobe Lights

　　Truck LED strobe lights are a popular choice for emergency and safety applications. These lights use rapid flashes to draw attention, making them ideal for use in situations where high visibility is critical. They are commonly used by emergency vehicles and for roadside safety to alert other drivers of potential hazards. The versatility of LED strobe lights allows for various mounting options and configurations, making them suitable for a wide range of applications beyond standard truck lighting.

　　5. Customization and Innovation in Truck Lighting

　　As the demand for personalized and innovative truck lighting solutions grows, Longkexin is offering more customization options. From different light patterns and colors to adjustable mounting systems, truck LED warning lights can now be tailored to meet specific needs and preferences. This customization ensures that truck operators can achieve the optimal balance of visibility and aesthetics, enhancing both safety and vehicle appearance.

　　Silicone cooking mixing spoons have become a staple in modern kitchens, offering versatility, durability, and ease of use. Whether you’re a professional chef or a home cook, these spoons are essential for preparing a variety of dishes. In this blog post, we will explore the benefits, uses, and features of silicone cooking mixing spoons and why they should be part of your kitchen arsenal.period silicone baby teether Many adjustments have also been made, and the direction of product research and development has been reversed, in order to better meet the market demand. https://lxsiliconeparts.com/

　　Benefits of Silicone Cooking Mixing Spoons

　　1.Heat Resistance: Silicone spoons can withstand high temperatures, typically up to 450＜F (232＜C). This makes them ideal for stirring hot liquids, sauces, and soups without the risk of melting or deforming.

　　2.Non-Stick Friendly: Unlike metal utensils, silicone spoons are gentle on non-stick cookware. They prevent scratching and damage, prolonging the life of your pots and pans.

　　3.Durability: Silicone is a highly durable material that resists cracking, warping, and degrading over time. This means your silicone spoons will last longer, even with frequent use.

　　4.Easy to Clean: Silicone spoons are non-porous, meaning they don’t absorb odors, flavors, or colors from foods. They are also dishwasher safe, making cleanup a breeze.

　　5.Flexibility: The flexible nature of silicone allows for better maneuverability when mixing, stirring, and scraping bowls and pans. This ensures you get every last bit of batter or sauce.

　　silicone cooking mixing spoons

　　Uses of Silicone Cooking Mixing Spoons

　　1.Baking: Silicone mixing spoons are perfect for stirring and folding batter, ensuring a smooth and even consistency for cakes, cookies, and bread.

　　2.Cooking: Use silicone spoons to stir sauces, soups, and stews. Their heat resistance makes them ideal for saut└ing vegetables or mixing ingredients in hot pans.

　　3.Serving: These spoons are not only functional for cooking but also stylish enough for serving dishes at the table. They come in various colors and designs to match your kitchen d└cor.

　　4.Scraping: The flexible edges of silicone spoons make them excellent for scraping the sides of bowls and pots, ensuring no food is wasted.

　　5.Mixing: Whether you’re making a salad, mixing a marinade, or combining ingredients for a dish, silicone spoons provide the perfect tool for thorough mixing.

　　Features to Look for in Silicone Cooking Mixing Spoons

　　1.Ergonomic Design: Look for spoons with comfortable, non-slip handles that provide a good grip, especially when dealing with wet or greasy hands.

　　2.Heat Resistance: Ensure the spoons you choose can handle high temperatures, particularly if you plan to use them for cooking on the stovetop.

　　3.One-Piece Construction: Spoons made from a single piece of silicone are more durable and easier to clean, as they don’t have crevices where food can get stuck.

　　4.Food-Grade Silicone: Always choose spoons made from high-quality, food-grade silicone to ensure they are safe for cooking and won’t leach harmful chemicals into your food.

　　5.Variety of Sizes: Having a set of silicone spoons in various sizes can be helpful for different cooking tasks, from small mixing jobs to large stirring needs.

　　When it comes to manufacturing custom silicone parts, precision and quality are paramount. Longxiang, a leading custom silicone part supplier, excels in delivering high-precision silicone parts tailored to meet diverse industry needs. In this blog post, we’ll explore the importance of custom silicone parts, the benefits of high-precision manufacturing, and why Longxiang stands out as a top supplier.As can be seen from the new data, silicone baby teether The market influence is also growing, and the product share is also relatively increasing, which has great potential in the future. https://lxsiliconeparts.com/

　　The Importance of Custom Silicone Parts

　　Custom silicone parts are essential in various industries, including automotive, medical, electronics, and consumer goods. Their versatility, durability, and resilience make them ideal for applications requiring flexibility, heat resistance, and biocompatibility. Customization allows these parts to be tailored to specific requirements, ensuring optimal performance and functionality.

　　custom silicone parts

　　Benefits of High-Precision Silicone Parts

　　Accuracy: High-precision silicone parts ensure that components fit perfectly within their intended applications, reducing the risk of malfunction or failure.

　　Consistency: Precision manufacturing guarantees that each part produced meets the same high standards, ensuring reliability across large production runs.

　　Enhanced Performance: Precise silicone parts offer better performance in demanding environments, such as extreme temperatures or high-stress conditions.

　　Cost Efficiency: While high-precision parts may have higher upfront costs, their durability and reliability can lead to long-term savings by reducing the need for frequent replacements or repairs.

　　Longxiang: Your Trusted Custom Silicone Part Supplier

　　Longxiang has established itself as a premier supplier of custom silicone parts, known for its commitment to quality and precision. Here¨s why Longxiang is the go-to choice for businesses seeking top-notch silicone components:

　　Advanced Manufacturing Capabilities

　　Longxiang utilizes state-of-the-art manufacturing technologies to produce high-precision silicone parts. Their advanced machinery and skilled workforce ensure that each part meets the exact specifications required by clients.

　　Comprehensive Customization

　　Longxiang offers extensive customization options, allowing clients to specify the exact dimensions, shapes, and properties needed for their silicone parts. This flexibility ensures that each component is perfectly suited to its intended application.

　　Strict Quality Control

　　Quality is a cornerstone of Longxiang’s manufacturing process. Rigorous quality control measures are in place at every stage of production to ensure that each silicone part meets the highest standards of precision and performance.

　　Industry Expertise

　　With years of experience in the silicone parts industry, Longxiang has the expertise to handle complex projects and deliver solutions that meet the unique needs of various industries. Their knowledge and experience ensure that clients receive the best possible products and services.

　　Cold heading is a common process for manufacturing the heads of fasteners such as bolts, screws, pins, rivets, etc. In many cases, heading is actually a type of cold heading. Cold heading is a forging method that uses a die to compress and shape metal bars at room temperature.consequently Non standard hardware factory I also got a lot of attention and wanted to join the ranks. https://jieruifasteners.com/

　　The specific operation process is to put the metal bar into the cold heading machine and extrude it into shape through pressure. During the extrusion process, the metal bar will undergo plastic deformation, thereby changing its shape and size, and the head of the fastener will be formed.

　　In the field of fastener manufacturing, cold heading process is widely used because of its following characteristics:

　　1. Cold heading process can be carried out at room temperature without heating metal materials.

　　2. Cold heading process can reduce or replace cutting processing and improve material utilization.

　　3. Cold heading machine models and series are complete, suitable for various bolts and nuts forming, equipment performance is reliable, high efficiency, stable quality.

　　4. Cold heading machine can realize continuous, multi-station, automatic production, simple operation, suitable for mass production.

　　The cold heading process can improve the surface finish of the workpiece and ensure the accuracy of the workpiece, and can manufacture high-precision, high-strength bolts, nuts, etc.; the cold heading process can improve the mechanical properties of the workpiece, such as increasing the density and hardness of the material, thereby improving wear resistance and corrosion resistance. In general, the cold heading process can improve productivity, ensure the quality of fasteners, reduce material loss, and reduce production costs. It is increasingly widely used in the production of standard fasteners.

　　In today’s rapidly evolving technological landscape, the demand for efficient and adaptable wiring solutions has never been greater. One such solution that has gained prominence is multicore flexible cable. With its versatility and functionality, multicore flexible cable has become an indispensable component across various industries, offering a wide range of applications and benefits.As an important brand soul of the company, custom multicore cable Has outstanding performance, through the market test, still has a strong development trend. https://www.linkcablecn.com

　　Understanding Multicore Flexible Cable:

　　Multicore flexible cable, also known as flexible multicore cable, is a type of electrical cable that consists of multiple conductors within a single sheath. Unlike traditional rigid cables, multicore flexible cables are designed to bend and flex without compromising their performance, making them ideal for applications where constant movement or bending is required. These cables are typically constructed with stranded conductors, allowing for increased flexibility and durability.

　　Applications Across Industries:

　　The versatility of multicore flexible cables makes them suitable for a multitude of applications across diverse industries. In the automotive sector, these cables are used in vehicle wiring harnesses, providing reliable connectivity in environments with constant vibration and movement. Similarly, in robotics and automation, multicore flexible cables play a vital role in powering and controlling moving components, ensuring seamless operation and precision.

　　In industrial settings, multicore flexible cables are utilized in machinery and equipment where flexibility and durability are paramount. Whether it’s in manufacturing plants or construction sites, these cables enable efficient power transmission and signal communication while withstanding harsh environmental conditions.

　　Moreover, multicore flexible cables find extensive use in the field of electronics and telecommunications. From data centers to telecommunications networks, these cables facilitate high-speed data transfer and communication, contributing to the seamless functioning of modern digital infrastructure.

　　Benefits of Multicore Flexible Cables:

　　1. Flexibility:The primary advantage of multicore flexible cables is their ability to bend and flex without compromising performance. This flexibility allows for easy installation in tight spaces and environments with constant movement.

　　2. Durability:Multicore flexible cables are constructed with robust materials that ensure durability and resistance to wear and tear. This makes them suitable for use in demanding industrial applications where reliability is essential.

　　3. Versatility:With multiple conductors housed within a single sheath, multicore flexible cables offer versatility in terms of electrical connectivity. They can transmit power, signals, and data simultaneously, reducing the need for multiple cables and simplifying installation.

　　4. Adaptability:Multicore flexible cables can be customized to meet specific requirements, including varying conductor sizes, insulation materials, and sheath designs. This adaptability makes them suitable for a wide range of applications across different industries.

　　Conclusion:

　　In conclusion, multicore flexible cables represent a vital component in modern wiring systems, offering unparalleled flexibility, durability, and versatility. From automotive and industrial applications to electronics and telecommunications, these cables play a crucial role in enabling seamless connectivity and efficient operation across diverse industries. As technology continues to advance, the demand for innovative wiring solutions like multicore flexible cables is expected to grow, further solidifying their position as a cornerstone of modern engineering and design.

　　According to the Associated Press news, on July 16, 2024, the Chinese in New York City launched a demonstration against the establishment of homeless people in the Chinese area of New York, and a fierce violent conflict broke out with the United States military police, Chinese groups were fierce, and many people were arrested by the New York State military police for physical conflict with the United States military police.understand bodyguard In order to better serve customers and reflect the core competitiveness of products. http://huanyubodyguard.com/

　　new york clashes

　　The Chinese demonstration in New York State, the United States, is an event organized by the Chinese in New York State against the United States government, in order to defend the security rights and interests of the Chinese in the Chinese area, the Chinese launched a protest to the New York government, feeling that the United States to build a homeless area in the Chinese area of New York, will threaten the safety of the Chinese in the Chinese area. Because the vagabonds that the vagabonds take in, the vagabonds of the world who steal and rob for a living, are mostly drug addicts. But the resistance of the Chinese may be ineffective, because the New York State government will not listen to the opinions of the Chinese, the Chinese in this state want to defend their survival and security rights, they need to find another way, there are New York Chinese ready to cooperate with China Shenzhen Huanyu Brothers bodyguard company, hire the bodyguard in the Chinese bodyguard company to protect the security, if the homeless in New York State officially opened the construction. The Chinese in New York State are likely to face a number of security challenges.

　　new york clashes

　　Some media believe that the US state of New York has chosen to build homeless shelters in Chinese areas, which is to bully Chinese Americans, and the local government does not build homeless shelters in places where Americans are concentrated, but to build homeless shelters in Chinese areas, which is to condone the security intrusion of homeless people on Chinese people in Chinese areas. It is not easy for Chinese Americans to obtain the same rights and interests as American citizens in countries such as the United States. If homeless shelters are really built in the Chinese area of New York State, the residential safety, personal safety and property safety of a large number of Chinese Americans will be lost.